Article No. 687401
IH-Set 30
Injection hose system for producing water-tight structural joints
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Sealing of construction joints in concrete structures for imperviousness to pressing water with general building inspectorate test certificate (AbP) in conjunction with IR PUR 2K 150
- Additional waterproofing of water stops or joint strips
Properties
- Single-walled, perforated injection hose made from PVC (3 x 10 m)
-
Preparation
-
Substrate requirements
Read the Technical Data Sheet for the injection material used.
-
-
Application instructions
-
Maximum length of injected section: 10 running metres.
Successive injection circles must overlap.
Mark injection circles using red and white formwork packers.
See enclosed assembly instructions for details.
-
-
Working tools / cleaning
-
More detailed information can be found in the Remmers Tool Programme.
-
-
Storage / shelf life
-
Unlimited if stored dry.