• Tex 4.8/100 and Tex 4.8/25
  • Tex 4.8/100 and Tex 4.8/25
    • Tex 4.8/100 and Tex 4.8/25
    • Tex 4.8/100 and Tex 4.8/25

    Article No. 418302

    Tex 4.8/100

    Reinforcement fabric made of E-glass coated with polymer plastics

    4183 | Tex 4.8/100
    Size / Quantity

    Brochures and Catalogues


    Product specifications

    Mesh size 4.8 x 5.1 mm
    Surface weight Min. 75 g/m²
    Warp tear strength 1000 N/cm
    Weft tear strength 950 N/cm

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Reinforcement inlay for polymer-modified bitumen thick coatings (PMBCs)
    • Reinforment inlay for flexible polymer-modified thick coatings (FPDs)


    • Rot-proof
    • Alkali-resistant
    • Application
      • Push the fabric into the coating mass over its entire area.

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

    • Storage / shelf life
      • Shelf-life 24 months
      • At least 24 months when stored upright and dry in the original container.

    • Usage
      • Total application rate approx. 1.1 m² / m²
      • Approx. 1.1 m²/m² Tex 4.8/100

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • The product must be disposed of in accordance with the official regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Tools, accessories and PPE