Article No. 109225
Fast repair mortar
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Concrete replacement according to
- DIN EN 1504-3
- Rili-SIB DAfStb 2001
- Concrete replacement for non-structurally relevant repairs
- Repair of pores, missing and broken out areas
- Early strength
- Very low shrinkage
- Well suited to overhead working
- Can be applied by spatula and felted
Stable, clean, dust-free
Observe the applicable technical regulations for the following parameters:
- Adhesive pull strength of the substrate
- Minimum roughness/roughness depth
Pre-wet the substrate so that it is slightly moist.
Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2
Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C
(+20 °C): approx. 20 minutes
Single layer 1.5 - 10 mm
Two layers < 20 mm, apply wet-on-wet
In broken-out areas < 100 mm
Applying corrosion protection:
Apply two layers of slurry with a thickness of min. 1 mm each, making sure the entire surface is covered.
Waiting time between layers: approx. 30 minutes.
Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.
Working tools / cleaning
Mixer, brush, filling knife, trowel, smoothing trowel, sponge float, plasterer’s float
Clean tools with water while the material is still fresh.
Storage / shelf life
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
Approx. 1.2 kg/m²/mm layer thickness
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.