Article No. 22202016
Solvent-free, skin-forming peel-off paste for water-free removal of dust, soot and other impurities
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Delicate and valuable interiors
- Surface contamination on stucco, natural stone, marble, concrete, brick, render, gypsum sculptures, polished wood and synthetic building materials
- Type 1
Physical cleaning for lightly adhering dirt
- Type 2
Special cleaner for marble
- Type 3
Physical and chemical cleaning for general impurities
- Type 5
Especially for cleaning fire residue
- For use by professionals
- Self-activating cleaning with deep action
- Forms a film and binds dirt
- Dust-free cleaning without additional water
- Contains a complexing additive, can be configured to suit the substrate and type of contamination
The substrate being cleaned must be dry and free from dust and loose debris.
Use a suitable tool to coarsely clean off the substrate.
Set up a trial area to determine the cleaning effect.
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C
Stir the material thoroughly using a suitable tool.
If necessary, stir in component B thoroughly.
Apply with suitables tools to the full substrate area.
Apply material over the entire surface manually or by airless spraying.
Fill undercut areas and contours thoroughly with the material.
After 24 hours and once completely dry, remove the film by pulling it off, keeping the tensile force as constant as possible.
Cleaned surfaces can be further cleaned with a damp sponge or medium-hard brush (nylon bristles).
Use as little water as possible.
Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.
Working tools / cleaning
Brush, lamb's wool roller, spreader and smoothing trowel. Airless spraying equipment Stainless steel or plastic tools are recommended
Clean tools immediately after use with water and detergent.
Storage / shelf life
If stored unopened in the original container and kept cool, dry and protected from frost, min. 12 months (component A)/min. 24 months (component B).
Approx. 1.0 kg/m² on flat surfaces Approx. 1.0 – 3.0 kg/m² on highly textured surfaces
Apply to a large enough trial area to determine the precise amount required.
The specified mixing ratios must be carefully observed.
The relevant test certificates must be observed when planning and carrying out work.
Always set up a trial area/trial areas first.
Deviations from applicable regulations must be agreed separately.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Any material that is contaminated after application must be disposed of in accordance with the applicable regulations.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.