Jointing

Joint mortar tailored to the stone

Joints in buildings assume a number of functions and therefore need to demonstrate a variety of different properties to meet the respective requirements.

This not only applies to the optical, but also to the physical, mechanical and in particular the moisture-related properties.

An intact joint network is a prerequisite for ensuring that the façade is resistant to driving rain. Penetrating moisture leads to a heavier frost load and a reduction in the thermal protection - both need to be adapted to the existing building substance and avoided. Remmers Joint Mortars comprises of a wide range of binding agent systems, grains and strengths, and selection options with respect to colour and capillary-braking properties. They can be selected to meet the individual application areas, situations and requirements at any time.

Joint Mortar

9 products found
 

View:

Article No. 106525

Cement-lime restoration jointing mortar

Article No. 102325

Trass-lime cement jointing mortar

Article No. 104625

Cement-free joint mortar

Article No. 035003

2-Component mineral jointing mortar with epoxy resin

Article No. 057325

Specially formulated jointing mortar

Article No. 056706

Fast-setting natural cement mortar

Article No. 056405

Mineral surface filler and fine render based on natural cement

Article No. 054335

Basic mixture (dry-slaked, cement-free sand/lime mortar) for producing mortars and renders to a historical formulation with the addition of local aggregates

Article No. 22205020

Mineral mortar for natural stone restoration, made from natural stone and a mineral binder