• iQ-Paint
  • iQ-Paint
    • iQ-Paint
    • iQ-Paint

    Article No. 023705

    Color SL

    Washable silicate interior wall paint, free from solvents and plasticisers

    Colour: white | 0237
    Colour: white | 0237
    Please choose a colour
    Size / Quantity

    Product specifications

    Density (20°C) 1.48 kg/l
    Viscosity Suitable for use

    Once fully cured

    Degree of gloss dull matt
    Water vapour permeability sd < 0.01 m

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on walls indoors and ceilings
    • Remmers interior insulation and mould control systems
    • Mineral substrates

    Properties

    • Water-based
    • Capillary-active
    • Highly permeable to water vapour
    • Mould-resistant thanks to alkalinity
    • Free from solvents and plasticizers
    • Low emissions
    • Wet abrasion resistance class 3 according to DIN EN 13300
    • Hiding power class 2 at 7 m²/l
    • Degree of gloss: dull matt
    • Preparation
      • Substrate requirements

        Dry, clean, free of dust and cracks (except hairline cracks) and capable of supporting a load.

      • Preparations

        The instructions for the iQ Therm system must be followed.

    • Application
      • Application temperature: min. 5 °C max. 25 °C
      • By brush / By roller / Airless/airmix spraying
      • Stir well.

        Coat the surface using a suitable tool.

        Apply the material in 2 coats, depending on the condition of the substrate.

        Wait at least 8 hours between coats.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        When coating continuous surfaces, only use materials with the same batch number.

        Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

        For the first coat, the material can be diluted with up to 10% water.

    • Working tools / cleaning
      • By brush / By roller / Airless/airmix spraying
      • Brush, flat brush, lambswool roller, airless spraying equipment

      • Clean tools, equipment and any splashed material immediately with water while still fresh.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 150 ml / m² per layer applied
      • Approx. 0.15 l/m² per coat

      • The application rate depends on the absorbency of the surface

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products

    Tools, accessories and PPE