Industrial hall for car components©

Industrial floor systems

Mechanical loading capacity due to fast and efficient finishes

Industrial floors - floors for various environments

Industrial floor systems can be found in all major sectors. That is why we, along with our experienced partners, have been providing support to a wide range of industrial sectors from automobile or mechanical engineering through to pharamceutical and other industrial sectors where floors need to keep what they promise and meet certain criterias.

An important success factor is the durability of an industrial floor. The most common mechanical loads to which floors are exposed are: traffic, impact, abrasion or point loads. This is why floor systems need to be specifically selected and applied for the individual loads.

In addition, chemical resistance is becoming increasingly important loads with respect to the stricter ground and water pollution control regulations (WHG § 62/63). Numerous chemicals are used in industrial applications and these can impact heavily on the floor substrate. These include oils, greases, fuels and soluble salts through to various alkalis, very caustic acids and aggressive cleaning agents. The concentration of chemicals in combination with the temperature conditions create a base for selecting the optimum industrial floor.

FeRFA Types of synthetic resin flooring


Type
Name Description Duty Thickness
1 Floor Seal Applied in two or more coats. Generally solvent or water borne. LD up to 150 μm
2 Floor Coating Applied in two or more coats. Generally solvent free. LD/MD 150 μm to 300 μm
3 High Build Floor Coating Applied in two or more coats. Generally solvent free. MD 300 μm to 1000 μm
4 Multi-layer Flooring Aggregate dressed systems based on multiple layers of floor coatings or flow-applied floorings, often described as ‘sandwich’ systems. MD/HD 2 mm
5 Flow Applied Flooring Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface. MD/HD 2 mm to 3 mm
6 Resin Screed Flooring Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimize porosity. MD/HD > 4 mm
7 Heavy Duty Flowable Flooring Having a smooth surface. HD/VHD 4 mm to 6 mm
8 Heavy Duty Resin Flooring Trowel-finished, aggregate filled systems effectively impervious throughout their thickness. VHD > 6 mm

Industrial flooring systems

20 products found
 

View:

Article No. 636103

Transparent priming and mortar resin

Article No. 630004

Thixotropic binder

Article No. 698111

Pigmented coating

Article No. 680211

Tough coating

Article No. 122413

Pigmented primer and base layer

Article No. 440525

Fire-dried quartz sand

Article No. 675225

Kiln-dried quartz sand mixture

Article No. 627825

Admixture for synthetic resin mortars

Article No. 664311

Pigmented, matt sealant

Article No. 674003

Transparent sealant

Article No. 675110

Filler mixture with a special aggregate grading curve

Article No. 26000713

Fine Quartz Sand