Low-emission floors

Low-emission and tested systems for residential areas

Low-emission floor coatings for your requirements

A floor should not only be able to withstand rising damp or heavy loads, but also present no harm to the air quality in the room. The emission of volatile organic compounds (VOC) can contaminate the room air and be harmful to health. To eliminate this, we offer a complete VOC-tested product range that corresponds to the stringent criteria of the AgBB. The entire coating structure is assessed by the independent and accredited testing institutes in test chambers, and checked in annual random checks.

Our systems not only waterbased coatings, we also have a large range of polyurethane and epoxy-resin coatings which also have a general technical approval. This increases the flexibility even in the planning phase so that all requirements can be taken into account and the building owner receives the system best suited for their needs.

Sustainability - the simple maintenance, lower material consumption and durability contribute to the positive ecological footprint of an industrial floor. Thanks to these properties they have a much lower impact on the environment than many other covering types. Corresponding national and international declarations of conformity (e.g. DGNB / LEED certificates) give users and investors assurance with regard to sustainability.

Low-emission floors

19 products found
 

View:

Article No. 636101

Transparent priming and mortar resin

Article No. 698102

Pigmented coating

Article No. 680211

Tough coating

Article No. 667411

Decorative coating

Article No. 142711

Transparent priming and mortar resin in systems subject to approval

Article No. 600101

Pigmented, water-based primer

Article No. 638101

Water-based, pigmented, silk-gloss sealant

Article No. 632111

Water-based, pigmented levelling layer and base coat

Article No. 363301

Transparent, silk matt sealant

Article No. 673503

Anti-slip, transparent sealant

Article No. 122413

Pigmented primer and base layer

Article No. 630510

Coloured flakes for fully broadcast blinding

Article No. 440525

Fire-dried quartz sand

Article No. 674203

Mineral blinding material

Article No. 683110

Pigmented roller coating (high build coating)

Article No. 26033011

2 Component, solvent free, self levelling polyurethane with good UV stability

Article No. 367306

Aqueous, transparent, two-component sealant

Article No. 634403

Transparent epoxy resin with a low tendency to yellow