• SP Top Q2

    Article No. 040825

    SP Top Q2

    Mineral fine render

    Product specifications

    Reaction to fire Class A1
    Compressive strength CS II (1.5 - 5.0 N/mm²)
    Hardened mortar bulk density Approx. 1.3 kg/dm³
    Particle size ≤ 0.5 mm
    Layer thickness Single layer 2-5 mm
    Bulk density Approx. 1.2 kg/dm³
    Water requirement Art. 0408 = approx. 6.0 l / 25 kg
    Art. 0524 = approx. 4.8 l /20 kg
    Water absorption coefficient w24 ≤ 0.5 kg/(m²h0.5)

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use outdoors
    • Surface render and fine render coating

    Properties

    • Water vapour permeable
    • Resistant to water, frost and weathering
    • Can be applied by hand or machine
    • Can be felted
    • Preparation
      • Substrate requirements

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Pre-wet the substrate so that it is slightly moist.

        Pre-wet hydrophobic substrates with low surface tension water.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Mortar cover / Filling knife / Trowel application / Application by spraying
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

      • Contact layer

        Using a suitable tool, apply the product as a contact layer.

         

        Apply product in the desired coating thickness.

        Smooth the surface using a suitable tool.

        Finish the surface once set.

         

    • Application instructions
      • Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

        Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.

        Hairline/shrinkage cracks are safe and are not cause for complaint as they do not impair the properties of the mortar.

        Apply additional diagonal reinforcement to the edges of building openings.

        Do not interrupt work when coating continuous surfaces.

        On larger surfaces and when there are several levels of scaffolding, coating should be carried out on all levels at the same time to avoid seams.

        When coating continuous surfaces, only use materials with the same batch number.

        Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.

    • Working tools / cleaning
      • Mortar cover / Filling knife / Trowel application / Application by spraying
      • Mixer, trowel, smoothing trowel, sponge float, smoothing board

      • Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • Usage
      • 1.3 kg / mm thick layer / m²
      • Approx. 1.3 kg/m²/mm, on average approx. 3.5 kg/m²

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • May contain traces of pyrite (iron sulphide).

        Low chromate content in accordance with Directive 2003/53/EC.

        Do not use on gypsum-based substrates.

        The mixing water must be of drinking water quality.

        Always set up a trial area/trial areas first.

        Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products