• Anti-Insect

    Article No. 205904

    Anti-Insect

    Colour: clear | 2059
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Hazard warnings

    • Use biocides safely. Always read the label and product information before using!

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and wood not directly exposed to weather
    • Wood in interiors and in protected outside areas
    • Control of wood-destroying insects in furniture and small wooden objects
    • House borer and deathwatch beetle
    • Not suitable for termite control

    Properties

    • Solvent-based
    • Fast-acting control
    • Preventive effect against new infestations
    • Contains low-odour solvents
    • High penetration capacity
    • Preparation
      • Substrate requirements

        Determine the nature and extent of the infestation.

      • Preparations

        Sand off or strip any old coatings and clean the surface of the wood.

    • Application
      • Brush
      • Drying time: can be worked over after 24 h
      • Apply by brush. Apply at least 2 coats.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Once dry, the treated wood can be further treated with Remmers wood products after no sooner than four weeks.

      • Drying

        Low temperatures, poor ventilation and high humidity delay drying.

    • Working tools / cleaning
      • Brush
      • Clean tools immediately after use with thinner and brush cleaner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Store in well-sealed, original containers, out of the reach of children and in a dry, cool, well-ventilated room which is protected from direct sunlight and frost. No smoking is permitted in storage areas.

    • General information
      • In accordance with DIN 68800-1, wood preservation measures must be planned in a timely and careful manner in coordination with all parties involved in the construction (architect, client, contractor) taking into account legal requirements and local conditions.

    • Disposal instructions
      • During use, all product losses must be collected and reused or disposed of as hazardous waste. The product and its residues must not be discharged into drains, sewers or directly into soil or water. The product must not be allowed to enter waste water when cleaning equipment.

        European waste code 03 02 02* organochlorinated wood preservatives

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.