Article No. 235003
Decorative, water-based medium build stain
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- For use on interior and exterior wood
- Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
- Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
- New coatings and maintenance
- Weather-resistant and UV-resistant
- Excellent adhesion, slip resistance and elasticity
- Weatherproof and moisture-regulating
- Easy to apply
Dimensionally stable wood building elements: wood moisture content 11-15%
Wood building elements with limited or no dimensional stability: wood moisture content max. 18%
The substrate must be clean, dry and capable of bearing a load.
Thoroughly remove any dirt, grease and non-adhering old coatings.
Sand grey and weathered wood surfaces down to sound, bright wood.
Exterior wood that needs to be protected against soft rot and blue stain must be pre-treated with a suitable wood preservative* - not necessary for interior wood (*Use biocides safely. Always read the label and product information before use).
Temperature of the material, air and substrate: from min. +10 °C to max. +30 °C
Apply by brush.
Apply in the direction of the grain.
Apply a second coat once the first has dried.
Maintenance coating: 1 - 2 coats with a slight intermediate sanding.
All colours can be mixed with one another.
Seal opened containers well and use contents as soon as possible.
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Clear, white and hemlock are suitable for use only on not directly weathered surfaces in outdoor areas, such as roof eaves, or as base coat.
Areas that are being coated or dried should be protected against rain, wind, sunlight and condensation.
Approx. 4 hours at 20 °C and 65% relative humidity.
Low temperatures and high humidity delay drying.
If necessary with 5-10% water.
Working tools / cleaning
Clean tools immediately after use with water and detergent.
Ensure that any residue from cleaning is disposed of correctly.
Storage / shelf life
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
Approx. 80 ml/m² in min. 2 coats.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.