• PUR SL-210 Finish

    Article No. 200505

    PUR SL-210 Finish

    Low-flammability 2K finish, especially suited to use in public facilities

    Colour: clear, cloth matt | 2005
    Size / Quantity

    Product specifications

    Binder Polyacrylate resin
    Density (20°C) Approx. 0.94 g/cm³
    Odour Typical

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for furniture
    • For professional users only
    • Primer & top coat
    • Hospitals and medical practices
    • Schools, nurseries and care facilities
    • High-quality furniture
    • Kitchen and bathroom furniture
    • Interior finishing of ships
    • Shop fitting and trade fair stands
    • Solid wood & veneers
    • Topcoat on coloured varnishes (resistance to metal rings, gloss level)

    Properties

    • Solvent-based
    • Quick-drying
    • Good sanding properties
    • Good flow properties
    • Excellent resistance to chemicals
    • Lightfast
    • Fire behaviour according to DIN EN 13501-1: C-s2,d0 on suitable substrates
    • Suitable for interior finishing of ships (IMO)
    • Free of aromatic compounds
    • Non-cytotoxic (not damaging to cells)
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.

        Sand wood using P 100 - 180 grit.

        If colouring is desired, stain the substrate using Aqua KB-004, Aqua BB-007 or Aqua PB-006.

    • Application
      • Application temperature: min. 18 °C max. 25 °C
      • Stir before use
      • Airless/airmix spraying / Flow cup gun
      • Stir well.

        Spray.

        Flow cup gun: nozzle size: 1.8 - 2.0 mm; atomiser air pressure: 2 - 3 bar.

        Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

        Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

        After drying and intermediate sanding (P 240 - 320), apply a second coat of the product.

        Repeat the process if necessary.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 2 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Before coating technically modified woods and wood-based materials, apply the coating to a trial surface and conduct a suitability test on the desired area of use.

        When coating surfaces that have been treated with a coloured varnish, max. 10% of the coloured varnish can be added to the product to counteract colour changes (lightening of the varnish).

        The time period during which the product can be overcoated without the need for intermediate sanding is based on the information under "Overcoating" (drying time). Once this time period has been exceeded, the surface must be sanded and dusted off immediately prior to further coats.

        Use breathable materials when packing the coated wood building elements.

        Optimised ventilation in connection with fresh veneer gluing on coarse-pored woods: add at least
        30% V-899.

      • Drying

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

    • Working tools / cleaning
      • Airless/airmix spraying / Flow cup gun
      • Airless/airmix spraying equipment, flow cup gun

        Clean tools using WV-891 Brush Wash or V-890 Thinner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 24 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Approx. 80 ml - 120 ml / m² per layer applied
      • 80 - 120 ml/m² per coat

    • General information
      • DIN EN 71-3 "Migration of certain elements":

        This product complies with the limits for the migration of heavy metals to children's toys according to DIN EN 71-3 and thus fulfils one of several further requirements for the safety of children's toys according to the EU "Toy Directive" (2009/48/EC).

        To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.

        Minor mechanical damage can be removed using the Remmers Repair Kit if necessary.

        Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.

        For applications according to the Marine Equipment Directive, the maximum wet application quantity is 360 g/m².

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.