• Aqua MM-825 Matting Agent

    Article No. 387501

    Aqua MM-825 Matting Agent

    Matting paste for water-based coating materials

    Variant
    3875 | Aqua MM-825 Matting Agent
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    Density (20°C) Approx. 1.04 g/cm³
    Viscosity (20 °C) Approx. 3700 mPas

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Matting paste for reducing the degree of gloss
    • Not suitable for matt coating systems

    Properties

    • Reduces the degree of gloss in water-based coating materials
    • Variable reduction in degree of gloss possible
    • Application
      • Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Adding the product may affect the chemical and technical characteristics of the varnished surface.

    • Storage / shelf life
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Application examples
      • Gloss reduction achieved by adding 4% Aqua MM-825:


        Products
        Gloss reduction
        Induline DW-601 Aqua Stop

        Approx. 15 - 20 units

        Induline LW-700

        Approx. 10 - 15 units

        Induline LW-720
        Approx. 15 - 20 units
        Aqua CL-440
        Approx. 10 - 15 units
        Aqua SL-418
        Approx. 10 - 15 units
        Aqua DSL-55
        Approx. 10 - 15 units
        Aqua DL-65
        Approx. 15 - 20 units
        Induline GW-310Clear & base C: approx. 30 - 35 units; base A: approx. 10 - 15 units
        Induline DW-610
        Base A: approx. 10 - 15 units; base C: approx. 30 - 35 units
        Induline LW-710
        Approx. 30 units
        Aqua MSL-45
        Approx. 10 - 15 units

    • General information
      • Please contact Remmers Technical Service before adding to a product that is not listed.

    • Disposal instructions
      • Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations.
        Do not pour liquid coating or residues down the drain, even when cleaning tools. Must not be disposed of with household waste. Completely empty packaging must be recycled.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Tools, accessories and PPE