Article No. 108625
PCC I (RM) Concrete replacement mortar for repairing concrete structures/screed mortar
Downloads & documents
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Concrete replacement for structurally relevant repairs
- Concrete replacement according to
- DIN EN 1504-3
- Industrial screeds
- Bonded screed, floating screed and screed on separating layer
- Heated screeds
- High mechanical resistance
- Very low shrinkage
- Can be applied by machine
Stable, clean, dust-free
Observe the applicable technical regulations for the following parameters:
- Adhesive pull strength of the substrate
- Minimum roughness/roughness depth
Pre-wet the substrate so that it is slightly moist.
Degree of purity SA 2 ½ if applying corrosion protection, otherwise SA 2
Temperature of the material, air and substrate: min. +5 °C to max. +30 °C
(+20 °C): approx. 90 minutes
Single layer thickness < 80 mm
Layer thickness in breakouts up to max. 100 mm
In the case of bonded screeds, apply the product while the bonding layer is still wet.
Protect fresh mortar surfaces from wind, direct sunlight, rain and/or frost for at least 3 days so that they do not dry too quickly.
Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.
Working tools / cleaning
Mixing tool, trowel, aluminium rule, finishing trowel, power trowel
Clean tools with water while the material is still fresh.
Storage / shelf life
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
Approx. 2.0 kg/m²/mm layer thickness, or 2.0 kg/dm³
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.