Article No. 129530
Accelerator for epoxy resins
Downloads & documents
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
Properties
- Easy to measure and dispense
- Solvent-free
- Accelerates full hardening
-
Application
-
As a general principle, higher temperatures will reduce and lower temperatures will increase the times stated.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
Usage
-
Up to 4% by mass based on the binder
-
-
Application examples
-
Epoxy ST 100 Development of Shore D hardness at room temperature (approx. 22 °C)
depending on the quantity of ACC H added
no ACC H + 2% by mass ACC H + 4% by mass ACC H 4 hours 0 16 60 6 hours 12 41 71 8 hours 15 55 75 Epoxy OS Color Development of Shore D hardness at room temperature (approx. 22 °C)
depending on the quantity of ACC H added
no ACC H + 2% by mass ACC H + 4% by mass ACC H 4 hours 0 17 62 6 hours 8 50 76 8 hours 19 63 79
-
-
General information
-
Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site.
Use of the accelerator results in a shorter processing time. Depending on the quantity used, there may be problems with adhesion, trowel marks or spiked roller marks on the surface.
Properties such as impact resistance, crack bridging, UV stability and early water resistance are negatively affected.
When applying to continuous surfaces, the material should always have the same quantity of accelerator to ensure uniform colour.
Not for use to accelerate other epoxy resin systems since system incompatibilities cannot be ruled out.
Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For professional users only!
Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.
-