• Copper Tape

    Article No. 455102

    Copper Tape

    Self-adhesive copper tape

    Variant
    4551 | Copper Tape
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • System component in electrically conductive systems
    • Copper band in the system SL Floor WHG AS (AbZ Z-59.12-303)

    Properties

    • Self-adhesive
    • Preparation
      • Substrate requirements

        The substrate must be load-bearing, dimensionally stable, solid, free of loose parts, dust, oils, grease, rubber marks and any other substances that could interfere with adhesion. It must be primed so as to remove all surface pores.

        Before the application of the product a smooth surface must be produced, e.g. with a scratch coat.

        Suitable Remmers epoxy primers, epoxy scratch coats or epoxy mortars must always be used.

        See the current Technical Data Sheet of the product in question and the system recommendations for more detailed information.

      • Preparations

        Install earthing elements and copper strands prior to application, based on the size and shape of the surface. Make sure that no point on the surface is more than 10 m from an earthing point or a connected copper strand.

        The connection to the equipotential bonding must be established by an authorised specialist firm.

    • Storage / shelf life
      • Protect form moisture
      • Unlimited if stored dry.

    • Safety / regulations
      • Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.