• Kiesol MB

    Article No. 300801

    Kiesol MB

    Special primer

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    Appearance milky
    Density (20°C) 1.01 g/cm³
    pH value 11

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • System component for waterproofing of buildings
    • Suitable for absorbent mineral substrates

    Properties

    • Water-based
    • Improves adhesion
    • Repels water
    • Strengthens
    • Preparation
      • Substrate requirements

        The substrate must be dry, clean, load-bearing and free of dust.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • By brush / By roller/ Low pressure spraying
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

      • Apply evenly to the material using a brush, roller or spray.

        Make sure that no pools form.

    • Working tools / cleaning
      • By brush / By roller/ Low pressure spraying
      • Broad and narrow brushes, block brush, lambskin roller, spraying equipment

      • Clean tools, equipment and any splashed material immediately with water while still fresh.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Total application/absorption rate 100 ml - 200 ml Total / m²
      • Approx. 100-200 ml/m² depending on the substrate

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products

    Tools, accessories and PPE