• Sanierputzfarbe

    Article No. 308005

    Color SP

    Highly water vapour permeable interior paint for renovation render systems

    Colour: white | 3080
    Colour: white | 3080
    Please choose a colour
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    Binder Solvent-free acrylate dispersion
    Density (20°C) Approx. 1.4 kg/l
    Viscosity Ready to use
    Water vapour permeability sd value < 0.01 m at 0.3 l/m²

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Opaque coating for repair plaster in indoor areas
    • Mineral substrates
    • Refurbishing coating on old, solid, matt paint
    • Wall paper/ woodchip wallpaper

    Properties

    • Water-based
    • Free from solvents and plasticizers
    • Low emissions
    • Wet abrasion resistance class 3 according to DIN EN 13300
    • Hiding power class 1 at 7.5 m2/l
    • Degree of gloss: dull matt
    • Highly permeable to water vapour
    • Preparation
      • Substrate requirements

        Dry, clean, free of dust and cracks and capable of supporting a load.

        Free of salts known to be damaging to building materials.

      • Preparations

        Remove any old coatings not capable of supporting a load, making sure not to leave any residue.

        Prime sanding, well adhering substrates with Primer Hydro F (art. 2842).

    • Application
      • Application temperature: min. 5 °C max. 25 °C
      • By brush / By roller / Airless/airmix spraying
      • Application requirements

        Temperature of material, environment and substrate: min. +5 °C up to max. +25 °C

      • Stir well.

        Coat the surface using a suitable tool.

        Depending on the conditions of the substrate, apply 1 or 2 coats.

        Wait at least 8 hours between coats.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        When coating continuous surfaces, only use materials with the same batch number.

        Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

    • Working tools / cleaning
      • By brush / By roller / Airless/airmix spraying
      • Paintbrush, flat brush, lambskin roller, airless sprayer

      • Clean tools, equipment and any splashed material immediately with water while still fresh.

    • Usage
      • 130 - 150 ml per layer applied 7 m²
      • Approx. 0.13 - 0.15 l/m² per coat

      • Application rates may vary depending on the condition of the surface.

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products