• Ilack C
  • Ilack C
    • Ilack C
    • Ilack C

    Article No. 081420

    Ilack C

    Cream-like, solvent-containing protective bitumen coating

    0814 | Ilack C
    Size / Quantity

    Brochures and Catalogues


    Product specifications

    Base solvent-containing bitumen emulsion
    Density (20°C) approx. 0.96 kg/l
    Flash point > +63 °C
    Consistency cream-like

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors
    • For use as a primer on old bituminous substrates (with blinding material)
    • Protective coating for concrete, masonry and render in the subsoil


    • Solvent-based
    • Cream-like
    • Contains solvents
    • Resistant to moisture
    • Resistant to heat and cold
    • Preparation
      • Substrate requirements

        The substrate must be clean, solid and free of oils, grease and release agents.

        Matt damp surfaces are permitted.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • By brush / By roller / Airless/airmix spraying
      • Ready to use, straight from the container.

        Blind with quartz sand if necessary.

    • Application instructions
      • In the case of liquid-applied waterproofing materials, direct sunlight and/or wind exposure can cause accelerated skin formation and accompanying blistering.

        Do not use in enclosed spaces.

        Do not apply any further layers until the previous layer has hardened sufficiently.

        Seal opened containers well and use contents as soon as possible.

    • Working tools / cleaning
      • By brush / By roller / Airless/airmix spraying
      • Flat brush, lambskin roller FC, suitable spraying equipment

      • Clean tools immediately after use with water.

        Remove dried-on material using V 101 Thinner (0978).

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 200 ml / m² per layer applied
      • At least 0.20 l/m² per coat

      • Application rate increases accordingly on rough surfaces.

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

        Do not eat, drink or smoke when working.

    Tools, accessories and PPE